Ceramic Plate Surfaces

Clothing, surface marking.

Ceramic stove - The product is not only long, but also expensive, so street work deserves the most serious attention.
The selection of the stove does not yet mean that all tasks of designing the interior of the space to be marked have been accomplished. Another such challenge, which requires direct involvement of you, is the choice of identification. Most popular today Sticking and diagonal. In the first version, the vertical and horizontal stitches of the previous row of the stoves coincide with those of the following row (see Figure). Location Ceramic plate surfaces the diagonal (see figure) differs from the marking that the interplicative stitches are set at an angle of 45° to the vertical(s) or to the walls when the floor and ceiling are lit. The old version of the illuminating (see Figure) is less used, where the lower vertical (for walls) of the interplicative stitches is closed by the ceramic stove of the outlet. Your choice. There is no significant advantage with regard to the durability of the surface encapsulated and no option is available for the quantity of waste. The amount of waste depends on the balance of the last stove in a row, with symmetric stoves not always justified.
Attention should be drawn to the fact that some angles may be closed by a shower cab or furniture, but it is desirable that the anti-resident walls be mirrored. In order not to return to the construction market or to the construction materials trader during the stove construction process, it is better to calculate and acquire the required amount of adhesive mixture. Usually, it is about 500 grams per 1 m2 compared with the package flow rate. Determine the extent to which metal (plastic) outer and inner corners are necessary to separate the ceramic stove (see photo). And, of course, without plastic clinks and strippers (crusts) no offense. The latter are needed. ♪ ♪